My Profile

Keep Up to Date:
Blog RSS
Blog
Forum RSS
Forum

card

...sentative collection of GNU/Linux software, automatic hardware detection, and support for many graphics cards, sound cards, SCSI and USB devices and other peripherals. KNOPPIX can be used as a product...
Never had this card. But does a Practical Perifirals Memory expander/with Internal 1200 baud modem count? Good! Never had problems installing it. my Hyundai XT used the extra 128K without a hassle. Th
...Pentium 933MHz, 512MB RAM, Intel 815 motherboard, onboard 3COM 10/100 LAN, Nvidia GeForce 2 GTS AGP Gfx card, PCI Intel Ethernet Pro 100 LAN card. Two hard drives (Seagates ST380021A (80GB) and ST3408...
... SuperMicro P4DC6 which has an onboard sound controller which uses i810_audio and ac97_codec. The Video card is a Hauppauge WinTV-DBX, Graphics card is PNY GeForce4 MX440. Loaded modules: tuner 10...
...arena, so I haven't played much with the multimedia stuff. First off, I installed an old STB TV tuner card that I had laying in my spare parts pile. I built a new kernel with V4L support and the BTT...
...ultipart question about testing a peer to peer application. I want to create a linux box with 4 network cards. Is there a way to configure the network cards to throttle the bandwidth to mimic differen...
...st realized that I should have four ide channels where I only have three! I have a PCI IDE Controller card and my procinfo lists... irq 14: 2630748 ide0 irq 15: 12611978 ide1 irq 11: 4273719 i...
...get nothing. At one point I could hear myself talking through my speakers. Then I found I should set my card to full-dupex. I found this in the Control Panel in SuSE. Now I still can't record in that ...
...ey used to be. (Maybe I shouldn't say that since I wasted all last weekend NOT getting my all-in-wonder card to work - but other than that :)...
...d. The machine spec is as follows: AMD 450 with 196 meg RAM, 9 gig disk space. S3 Trident 3D graphics card and an Illyama vision master 400 pro monitor. Any help on this would be greatfully apprec...
I there a fire wire card that is compatable with Linux? Im interested in an Adaptec 4300 card. (Is there an up to date Hardware compat. list?)
...knows where the code is located for this, because I need some code to save the current state of the VGA card and switch to text mode (or vice versa). I thought that looking into the source would be of...
This is hillarious! IBM found out you could store more data on a punch card than you could a DVD. http://www.msnbc.com/news/765188.asp And appearently it's true.
....2 on a new computer that has no other OS on it. The problem is that the computer uses a GeForce4 video card. SuSE and Mandrake support GeForce2 and GeForce3 'out of the box', but both require the ins...
I'm thinking to buy the Orinoco combo 8480-WD PCMCIA card can can do 802.11a/b/g. Will this Orinoco card work for Linux? Thanks.
...I've written this script that, when launched from the command line, will change the channel on my tuner card and record for a set period of time. It takes the first argument as the channel, the second...
... is the easy part since there is loads of info online, but my question is regarding sharing of the soundcard between different users running the different sessions. Basically, there are going to be ...
... a good information site on the internet, that handles how to make use of the tv-out feature of graphic cards in Linux? Greetings, - Rainer Hahnekamp...
folks i am trying to use the pcmcia 3.2.3 pkg with a DLink-680 pc card on this toshiba laptop running redhat 6.2 with a 2.4.19 kernel. the pcmcia is installed and starts fine (/etc/rc.d/init.d/pcm
In the last month, I had to replace my old system with a new system. I used the old NIC card, modem, and other stuff with my cable service, but only replaced the mother board. Well since then, I've
I have successfully configured and tested Gnomemeeting with a LinuxJack PCI card and driver to connect with other GM users and to make PC to phone calls. To get things tested and working, I initially
...the customers place I get a connection from /dev/ttyS0 and S1. I have to prepare two further PCI-serial cards that 6 terminals can be in use. But with the same Wyse terminal at home with my own cable ...
...ted, to get Puppy to boot off different media. First take on it is I have Puppy booting off a USB flash card. Possibilies are CDROM, Zip, LS120/240, hard drive... Also, I have set Puppy up for ppp m...
...Hat 8.x ? Also, I installed this on a Compaq Deskpro P2, but RedHat seems to be unable to find the soundcard for this. Anybody got any suggestions here? Thanks in advance Morenga...
Bit more info please, like kernel, snd card type, drivers used, etc. What it sounds like at this point is that the linux driver isn't able to fully initialize the card, but the windows driver can.
...e how the target host on the test network reacts. I was wondering how I can see which packets the OS discards? Is there some kind of file where this kind of information will be registered, or does the...
...Grub has a known bug with a 1.2TB Raid Disk? I have 8 of 180GB disk attached to 3ware 7850 controller cards. Either lilo and grub does not allow me to boot after installation. Thanks in advance....
...found himself hovering right next to an office building. The pilot makes a sign out of a large piece of cardboard with the message 'Where am I?'. The people in the building read the message and hudled...
...e a look. That's right, KOBOL. As in Common Business Oriented Language. Echos of Amazing Grace, punched cards, and Gene Amdahl. It was strange to see a classical batch offering from the master of obje...
I'm going to be going out later on to pick up a new video card for my primary workstation (RH 7.3) Does anyone have any suggestions for a good model that works well with Linux? About the most inte
...with it for a couple days, and i was getting sound out of the speakers. Therefore my speakers and sound card are both working. Then I got rid of lindows and installed redhat. Now there's no sound. S...
...en LCD monitor. I know that Linux (most versions) have problems either identifying or working with some cards. Can anyone suggest a card (an monitor?) that will work with most distos? This is a busine...
... have a considerably older system than you and I am running MDK8.2 just fine. If you have another sound card that shipped with your computer you might have to disable it in the BIOS. My USB is detecte...
I've added a rocketport card into the machine. Works just fine after modprobe rocket (It handles nodes /dev/ttyR*) However, I'm trying to have this module loaded automatically. I've tried alias tock
...st set up my audio. I use redhat8.0 xmms 1.2.7(comes with redhat8.0) When I run 'redhat-config-soundcard', I can hear the music. When I run 'xmms', push the 'add' button, and try to add mp3 songs,...
For some reason every time I boot my sound card doesn't work and I need to run sndconfig. Card is a SoundBlaster PCI 16. Also it's really quiet, even with the volume turned all the up. When I boot i
...sound setup is rather flaky. I can sometimes get sound, sometimes I am without. I have an onboard sound card on my motherboard, and the soundcard detection utlity gives me the following information: ...
...S, Apache, and PostgreSQL are all working). The only remaining major problem is my 4-port UART (serial) card. The 2.4 kernel sees it *but* things are not working well. I need it for both ifmail (Linux...
...system (I am a newbie, but working hard to end that). However, when I first did it, it probed the video card (a Diamond MM Monster Fusion) and got 3dfx's Voodoo Banshee (right chipset, wrong card). I ...
...ow does sound production work with X-Terminals? For .wav or mp3 sound reproduction, it requires a sound card. Are there X-Terminals with sound cards built in?...
...hing worked fine. Recently I did some substantial upgrades on my system (new MB, chip, memory and video card) and while RH8 and kudzu were easily able to reconfigure the system, boot up and work fine,...
Page: 1

Copyright © 2006 - Dec 2008 My Linux Gang